Announcement: Cyndar is tracking the company's actions in response to the COVID-19 crisis and improving best practices to incentivize better business behaviors. We voluntarily reduce profits to help companies through their sadness. We sincerely wish you health

Safety sensor safety protection manufacturers & suppliers

Home / All / Safety edge sensor / The safety edge is used on the edges of parts that are dangerous to crush and shear. /

A safety edge sensor that can be used to protect the moving parts of machinery.

A safety edge sensor that can be used to protect the moving parts of machinery.

A safety edge sensor that can be used to protect the moving parts of machinery.
A safety edge sensor that can be used to protect the moving parts of machinery.A safety edge sensor that can be used to protect the moving parts of machinery.A safety edge sensor that can be used to protect the moving parts of machinery.A safety edge sensor that can be used to protect the moving parts of machinery.
CategoriesThe safety edge is used on the edges of parts that are dangerous to crush and shear.
BrandCYNDAR
ModelLS-PSE
Protection levelIP65
Response time13ms
Maximum sensing angle<90°
Update TimeMay 16,2024
Detail Information
Product Features

Principle of Safe Edge is a pressure-sensitive device used to protect the safety of personnel and equipment in industrial sites, as well as the anti-collision protection of electric aerial vehicles for unmanned transportation systems (AGVs, RGVs). It has a complete range, mortgage activation, and can be customized according to customer requirements. When used with the controller, it can realize automatic fault diagnosis.

Please use precautions

1) Please be sure to use the Principle of Safe Edge with the matching safety relay in the manual.

2) The Principle of Safe Edge cannot be directly connected to the switch contacts of ordinary intermediate relays.

3) The safety touch edge cannot be directly connected to the PLC for use.

4) Do not apply a load to a certain position of the safety contact for a long time, otherwise the safety contact may be damaged.

5) Do not immerse the Principle of Safe Edge in water or use it in occasions with frequent water splashes.

project

Safe touch

Detection method

Pressure sensing method

Maximum sensing angle

<90°

Trigger force (according to specifications and usage)

≥50N-250N

Mechanical life

>3,000,000 times

Surface protection layer material

TPE elastomer, EPDM rubber, CR rubber

Ambient temperature

-20 degrees -55 degrees

Protection level

IP65

Maximum humidity (23 degrees)

95% (condensation)

Response time

13ms

Security Classification

stand by

stand by

Cat.3

Cat.3

>30 years

>30 years

3*107

3*107

52560/year

52560/year

6.99*10-10 1/h (SIL3)

6.99*10-10 1/h(SIL3)

The safety edge contact system composed of the safety edge and RS8300, SRA/B safety controller complies with the following standards.

EN1760-2 ISO1856-2 EN62061 EN ISO138849-1 IEC61508 EN60204-1

 

Safety contact edge profile table
Safety touch edge mounting base and applicable specifications
Application

Protective doors of processing machinery:

The safety edge is installed on the moving part of the protective door. When a person or object is detected in contact with it, the door can stop moving to prevent the person or object from being caught. Usually the safety edge is only used on machines whose moving parts can stop immediately after the power is removed. This accessory is used to protect other objects in contact with it.

Review
  • Loading...
Please send your message to us
We can help you find what you want! Talk to our sales team members and benefit from their expert advice
*Email
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Since 2010, Cyndar has been committed to safety sensors. We insist on technological innovation and put customer success first. A professional pre-sales team will guide customers on how to choose the most suitable products.

News