Announcement: Cyndar is tracking the company's actions in response to the COVID-19 crisis and improving best practices to incentivize better business behaviors. We voluntarily reduce profits to help companies through their sadness. We sincerely wish you health

Safety sensor safety protection manufacturers & suppliers

Language:

English

English

Home / All / Safety laser scanner / 2D safety laser scanner sensor /

Outdoor use 2d laser profile scanner safety laser scanner replaces vehicle separation

Name: Outdoor use 2d laser profile scanner safety laser scanner replaces vehicle separation
Brand: CYNDAR
SKU: 18298300
Rating: 4.75 (10 reviews)

Categories	2D safety laser scanner sensor
Brand	CYNDAR
Model	XD-TOF-20S
working environment	Indoor / outdoor
light source	Infrared laser (905nm)
Scanning angle range	300 °(- 60°~+240 °)
Scan angle resolution	0.5°
Measuring range	0.1m~20m
Environmental illuminance range	≤ 70,000lux
Terms of Payment	T/T, Paypal
Update Time	September 26,2023

Detail Information

Product size drawing and parts

Product application scenarios and others

2d laser scanner sensor safety area scanner can be used for road vehicle detection

Product brochure download(PDF download)

Safety Laser Scanner Vehicle Detector is a kind of detector whose principle is laser ranging based on time-of-flight measurement. TOF-20S emits a laser pulse and measures the time it takes for this pulse to return after being reflected on the surface of the target to be measured, and then converts it into distance data to achieve comprehensive detection of vehicle data. Compared with other detection technologies, infrared vehicle detector product technology Mature, easy to install, high-speed response, strong anti-interference, can output rich vehicle data information, can reliably detect various special vehicles

laser scanner sensor 2D scan

TOF-20S safety laser scanner deflects the ranging laser pulse by 90° through a mirror with an angle of 45° to the original emission light path. This mirror is driven to rotate by the motor, and the rotation axis is parallel to the original emission light path, so the actual distance measurement light path Distributed on the scanning plane perpendicular to the rotation axis, and the ranging azimuth angle is the same as the motor rotation azimuth angle, so as to realize two-dimensional optical scanning, and the distance of each point on the cross section of the ranging scanning plane can be obtained by the external environment, as shown in the figure : Scanning measurement mechanism, two-dimensional cross-sectional scanning" as shown. TOF-20S uses a specific TCP network message to provide users with two-dimensional measurement data with a fixed scanning frequency through the Ethernet port.

Safety laser scanner vehicle detector can be used for outdoor detection, anti-light up to 70,000 Lux

TOF-20S accessories and interfaces

TOF-20S safety laser sensor product size

Measuring coordinate system/scanning range/range

In the factory setting, the original working scanning range of TOF-20S is the device scanning range of 300 °, the scanning start angle is-60 °, and the scanning end angle is 240 °

TOF-20S software setting interface

For detailed usage of FILPS, please read the "Lidar Diagnosis and Configuration Software (FILPS) Manual

Safety laser scanner scene measurement and area monitoring

2d lidar scanner TOF-20S analyzes and processes the distance data obtained by the two-dimensional scanning. The application system can measure and monitor the scene, detect and locate various targets in the scene, measure its shape, and pass The intelligent algorithm realizes scene analysis, carries out spatiotemporal tracking, type recognition and behavior analysis of the target, and finally outputs the analysis results according to the application requirements, such as alarming, sorting and guidance.

Product application scenarios and others

Two-dimensional sensor scanner for rear area monitoring with driver assistance systems-a standard solution for many applications

The safety laser sensor vehicle separation scan mode is a high-speed synchronous progressive scan mode, which can resist up to 70000LUX direct light source, and can completely eliminate all kinds of strong light and electromagnetic interference.

Safety laser scanner sensor can be used for sheet length and width detection, logistics and transportation detection

2D safety laser scanner for safety protection in dangerous areas of indoor and outdoor construction sites to prevent people or objects from entering and causing alarms

Two-dimensional sensor scanner for rear area monitoring with driver assistance systems-a standard solution for many applications

Factory and product content

About the certificate

KeyWords

Review

Loading...

Safety laser scanner sensor 20m detection XD-TOF-05D
working environment	Indoor / outdoor
light source	Infrared laser (905nm)
Laser safety level	Class I (GB 7247.1-2012, human eye safety)
Scanning angle range	300 °(- 60°~+240 °)
scanning frequency	25Hz
Scan angle resolution	0.5°
Measuring range	0.1m~20m
10% reflectance range	15m
Built-in application	Area monitoring
Operating Voltage	9V~28V DC
Power consumption	5W
Enclosure rating	IP65 (GB 4208-2008)
weight	0.6Kg
Dimensions (L ╳ W ╳ H)	83.5 ╳ 85 ╳ 104.88 (mm)
range of working temperature	-25℃~+ 50 ℃
Storage temperature range	-30℃~+ 70 ℃
Environmental illuminance range	≤ 70,000lux
Monitoring mode	Point number monitoring/target width monitoring/contour monitoring
Number of area groups	16 groups, support self-learning background cropping, support networked cameras for video positioning and tracking of monitoring targets
Front panel buttons	Quantity, 1, signal output/start self-learning/restart device
1/O output	PNP output
Ethernet network protocol	TCP/IP
Ethernet rate	10/100Mbps