Announcement: Cyndar is tracking the company's actions in response to the COVID-19 crisis and improving best practices to incentivize better business behaviors. We voluntarily reduce profits to help companies through their sadness. We sincerely wish you health

Safety sensor safety protection manufacturers & suppliers

Home > Products > Safety edge sensor > The safety edge is used on the edges of parts that are dangerous to crush and shear. >

The safety edge is used on the edge of the rolling door to control the lifting.

The safety edge is used on the edge of the rolling door to control the lifting.

The safety edge is used on the edge of the rolling door to control the lifting.
The safety edge is used on the edge of the rolling door to control the lifting.The safety edge is used on the edge of the rolling door to control the lifting.The safety edge is used on the edge of the rolling door to control the lifting.The safety edge is used on the edge of the rolling door to control the lifting.
CategoriesThe safety edge is used on the edges of parts that are dangerous to crush and shear.
BrandCYNDAR
ModelLS-PSE
Maximum sensing angle<90°
Detection methodPressure sensing method
Mechanical life>3,000,000 times
Update Time2021-06-18
Detail Information
Product Features

Bend edge is a long strip of rubber material that can be bent. It can be fixed on the edge where there is a danger of squeezing and shearing for safety protection. If the controller is connected, the pressure output switch signal is detected, and the personal safety can be protected by controlling the machine circuit.

Apply vertical pressure to the safety edge to make the conductors of the internal induction belt contact each other, this time causing the resistance and current to change, which will be further analyzed by the control unit. If the Escalator safety edge is installed correctly, as long as the internal induction strap is not damaged, it can function normally even if the Escalator safety edge jacket is damaged.

Storage and use environment requirements:

1) Do not store or use the Safety edge sensor in an environment exposed to direct sunlight for a long time.

2) Safety margin should not be stored and used outside the range of -35℃ to +80℃.

3) Do not store or use Safe touch outside the range of 86~106KPa air pressure

4) Do not store and use the Safety edge sensor in an environment containing strong corrosive or flammable gas.

project

Safe touch

Detection method

Pressure sensing method

Maximum sensing angle

<90°

Trigger force (according to specifications and usage)

≥50N-250N

Mechanical life

>3,000,000 times

Surface protection layer material

TPE elastomer, EPDM rubber, CR rubber

Ambient temperature

-20 degrees -55 degrees

Protection level

IP65

Maximum humidity (23 degrees)

95% (condensation)

Response time

13ms

Security Classification

stand by

stand by

Cat.3

Cat.3

>30 years

>30 years

3*107

3*107

52560/year

52560/year

6.99*10-10 1/h (SIL3)

6.99*10-10 1/h(SIL3)

The safety edge contact system composed of the safety edge and RS8300, SRA/B safety controller complies with the following standards.

EN1760-2 ISO1856-2 EN62061 EN ISO138849-1 IEC61508 EN60204-1

 

Safety contact edge profile table
Safety touch edge mounting base and applicable specifications
Application

Shutter doors:

The Safety edge sensor is installed on the bottom edge of the rolling door. When a person or an object is detected in contact with it, the rolling shutter door can be made to stop moving in the countryside. Prevent Director Jia or objects. Applying vertical pressure to the safety protection edge causes the conductors in the contact belt to contact each other, which causes the resistance and current to change, and there is a control mechanism for further analysis. If the Safety protection edge is installed correctly, the safety edge will not leak water. As long as the contact belt is not damaged, it can function normally even if the safety edge is damaged.

Please send your message to us
We can help you find what you want! Talk to our sales team members and benefit from their expert advice
*Email
*Title
*Content

Agree to use terms of service

Since 2010, Cyndar has been committed to safety sensors. We insist on technological innovation and put customer success first. A professional pre-sales team will guide customers on how to choose the most suitable products.

News
  • CYNDAR light curtain conventional specification introduction
    CYNDAR light curtain conventional specification introduction
    CYNDAR light curtain is an intuitive and easy-to-operate safety device, suitable for machine safety protection. They are designed to withstand the challenges common in manufacturing and packaging environments.
  • How the safety light curtain works
    How the safety light curtain works
    For semi-automatic equipment, safety light curtains are often used, and only semi-automatic equipment will use safety light curtains. The main reason is that semi-automatic equipment requires human intervention.